By Eco Furniture Design, Cape Town
Bar chairs South Africa: our Leah Steel Bar Stool is 480 × 410 × 650 mm, a counter-height seat with a solid wood top on a powder-coated steel frame. We make it in our Cape Town workshop in oak, ash, pine or blackwood, and deliver it across South Africa. For another height, ask us about a custom design.
This page on bar chairs South Africa is for anyone seating people at a raised surface: a homeowner with a kitchen island, a guest house with a breakfast counter, a restaurant or bar fitting out its seating. Many searches for bar chairs for sale are really for a kitchen counter, and a counter and a bar are not the same height. So before timber or finish, the question is how high your counter is. Below are the standard heights, our stool, and what we build for anything else.
Bar chairs South Africa at a glance
- Counter stools seat you at 580 to 710 mm for an 890 to 1020 mm counter; bar stools at 740 to 810 mm for a 1040 to 1090 mm bar.
- The Leah Steel Bar Stool stands 650 mm high, so it suits a counter-height surface.
- Solid wood seat in oak, ash, pine or blackwood, on a powder-coated steel frame.
- Other heights, bar tables and counters as custom designs; delivery across South Africa and to SADC countries.
Bar chairs South Africa: contents
1. Bar chairs South Africa: counter height or bar height?
The word “bar” covers two heights. A kitchen counter or island is usually lower than a pub-style bar, and each takes its own seat. These are the standard ranges published by Dimensions.com, in millimetres:
| Seat | Seat height | Surface it suits |
|---|---|---|
| Counter stool | 580 to 710 mm | Counter or island, 890 to 1020 mm |
| Bar stool | 740 to 810 mm | Bar, 1040 to 1090 mm |
At 650 mm, our Leah Steel Bar Stool sits inside the counter range, not the bar range.
2. Bar chairs South Africa: measure before you buy
Measure from the floor to the top of your counter, and then to the underside of the top, where your knees will go. The same source asks for at least 250 mm between the top of the seat and the underside of the counter.
Check your counter’s height against the table above and you know which seat you need: a surface between 890 and 1020 mm takes a counter stool like the Leah; one between 1040 and 1090 mm needs a taller bar stool.
3. Bar chairs South Africa: the Leah Steel Bar Stool
The Leah is 480 mm across, 410 mm deep and 650 mm high. Its seat is solid wood, and it stands on an open, circular frame of powder-coated steel. It is a backless stool, built in our Cape Town workshop.
Every Leah is made in the timber you choose. Here is the same stool in each of our four timbers:
4. Bar chairs South Africa: which timber and finish?
Oak, ash, pine or blackwood: the seat comes in any of the four. We recommend a clear finish on oak and blackwood, which leaves the grain plain to see.
For colour, the Leah’s product page lists stains such as chestnut, mocha and blackwash. Our stains are custom colour-matched, so the shades are ours alone, and they sit under a low-VOC water-based clear seal. See them on our wood finishes page.
Bar chairs South Africa for restaurants, bars and guest houses
Bar furniture for a restaurant, bar or guest house: a row of stools at a counter, in one timber and one finish.
- Trade terms for designers and architects once verified
- Stools, bar tables and counters built to your project’s heights
- Delivered nationwide and into SADC countries
- Our 5-year warranty on every stool
5. Bar chairs South Africa: other heights, bar tables and counters
If your bar stands at 1040 mm or more, the Leah will sit too low. Our custom furniture service builds range pieces to other sizes and custom designs to order, so a stool can be made for your height.
The same goes for the surface itself. See our custom bar tables, counters and barstools, and our bar stools guide for more on stools.
6. Bar chairs South Africa: how do you order?
Choose your timber and finish on the Leah’s product page, or send us your counter height and the number of stools you need. Lead times change with the season, so ask us for the current one.
We deliver across South Africa and to SADC countries, each stool bubble-wrapped. Larger orders can be collected from our Cape Town workshop and smaller ones from our showrooms.
Our showrooms hold ready stock; ask whether a Leah is on the floor before you visit.
Our showroomsBenches and chairs in the same four timbers.
Browse seatingHow we deliver an order, and how returns work.
Read the termsBar chairs South Africa: your questions
What is the difference between counter chairs and bar chairs?
Height. A counter stool seats you at 580 to 710 mm for a counter of 890 to 1020 mm; a bar stool at 740 to 810 mm for a bar of 1040 to 1090 mm.
What height stool do I need for a 900 mm counter?
A counter-height stool. A 900 mm counter falls in the 890 to 1020 mm range, which takes a seat of 580 to 710 mm, and the Leah stands at 650 mm.
Is the Leah tall enough for a bar?
Not for a bar of 1040 mm or more, which needs a seat of 740 to 810 mm. Ask us about a custom stool for that height.
Do you make wooden bar chairs?
The Leah has a solid wood seat in oak, ash, pine or blackwood on a steel frame. Other designs can be made to order through our custom furniture service.
Does the Leah have a backrest?
No. The Leah is a backless stool with a solid wood seat.
Can you supply stools for a restaurant or bar?
Yes. We build seating for hospitality projects in one timber and finish, and verified designers and architects can buy on trade terms.
Where can I see the Leah before I buy?
Our showrooms hold ready stock. Ask us first whether a Leah is on the floor.
Do you deliver bar chairs outside Cape Town?
Yes. We deliver nationwide and to SADC countries, with each stool bubble-wrapped.
Is there a warranty on your bar stools?
Every stool we make carries our 5-year warranty.
Bar chairs South Africa: your next step
Measure your counter from the floor to the top, count the seats you need, and send both to us with the timber you want.



